Six Tips To Prolong The Life Of Your Hot Water Heater

Six Tips To Prolong The Life Of Your Hot Water Heater


Here are some tips and tricks to prolong the life of your hot water heater straight from the pros at CPI!

1. Regularly flush your tank to remove any build up from the bottom of the tank.

2. Poor water conditions can corrode your water heater. So think about installing an Anode Rod or 2nd Anode Rod. This rod sacrifices itself to protect the tank. If you already have an Anode Rod installed, inspect it on at regularly basis, so you know when it is time to replace it.

  1. Check your water pressure as excess pressure can wear the tank, pipes and joints which can lead to a leak or burst.
  2. To prevent a ruptured water heater install a Thermal Expansion Tank. When water is heated, it expands and creates internal pressure. A thermal expansion tank is able to prevent a rupture by holding the expanded hot water if it becomes too much for the main hot water tank to hold.
  3. Inspect the Temperature & Pressure Relief Valve. This key safety feature releases excessive pressure if the tank's thermostat malfunctions.
  4. Installing a water alarm will let you know if your tank has sprung a leak, and help save your home from water damage.
  5. A water softener will break down the minerals in the water and prevent damage caused by "hard" water.

For more information on these preventative maintenance measures or if you have other questions, be sure to ask your CPI technician.


Don't Cry. Call CPI!

Rescuing You from Discomfort
    • Please enter your name.
    • This isn't a valid phone number.
    • Please enter your email address.
      This isn't a valid email address.
    • Please make a selection.
    • Please enter a message.